1. What this calculator computes — and what it doesn't
This calculator computes one hit from numbers you supply: damage taken from “enemy ATK at the hit” and your “DEF at the hit”; damage dealt from your “ATK at the hit” and the enemy's DEF/DR. It is not a team builder: leader skills, links, ki interpolation, and passive chains that produce those ATK/DEF values are out of scope (see §12, not modeled); a full builder may come later.
The engine is a set of pure functions with acceptance tests (examples A–F) that must all pass before any release. Only two floor operations exist, and both are documented below.
2. Damage dealt and damage taken — the crit asymmetry
Both modes share one type table and the same stacking rules, but criticals differ:
- Enemy crit (taken mode): ×1.5, applied early; the type multiplier still applies afterwards.
- Character crit (dealt mode): community model — replace type+guard with ×1.9 and treat enemy DEF as 0 (enemy DR still applies), or the type 1.5 × crit 1.25 = 1.875 variant. Neither is a verified constant; §11.
3. Damage received, step by step
Damage = (Enemy ATK × SA Multiplier × ATK Down × Damage Reduction × Type Multiplier × Variance − DEF) × Guard Multiplier
- Enemy ATK — base ATK × (1 + summed self buffs). Three independent “ATK +100%” lines sum to ×(1 + 3). If a guide already states the stacked total (6,900,000 = 2,300,000 × (1 + 1 + 1) in example E), do not multiply again. → calculator
- SA multiplier — normals are 1.0; Supers use the event page's multiplier (400% ⇒ 4.0). → calculator
- Enemy crit — ×1.5 if present. If a crit “ignores X% DEF”, that belongs to the DEF step, not here.
- ATK Down, three sources — → calculator
- From your Super Attack: subtracted from the enemy's SA multiplier (4.0 − 0.2 = 3.8; a normal drops to 0.8).
- From items: its own ×(1 − X%) step.
- From passives / Dokkan Field: sum first, then one ×(1 − total) step.
- Guide intermediate: 1,500,000 × (4.0 − 0.2) × 1.5 × (1 − 0.3) = 5,985,000.
- “Disables ATK & DEF Reduction” ignores the first and third sources; items only keep working if that enemy's page says so, and the calculator warns accordingly.
- Damage reduction — → calculator general sources are summed then applied as one ×(1 − total): 30% + 20% ⇒ ×0.5, not 0.7 × 0.8. A “normal attacks only” DR is a second multiplier that applies only while the enemy is not supering.
- Type multiplier — from the defender's view; see the table in §7 and the type chart.
- Type DEF Boost — Hidden Potential levels 0–15, each −0.01 to the type multiplier, but only when the defender has type advantage: same-class advantage 0.9 → 0.75 at 15, different-class 1.0 → 0.85, passive-Guard 0.8 → 0.65. Nothing at neutral or disadvantage. → calculator
- Variance — ×1.00 to ×1.03, midpoint 1.015; the result area always shows all three. → calculator
- DEF — the DEF at the moment the hit lands. If the attack ignores X% DEF:
floor(DEF × (1 − X))first — this is floor point 1 of 2. Fixture B: 2,438,855 × 0.8 → 1,951,084. - Guard — ×0.5 when guarding (passive, natural, or item), else ×1; then floor — floor point 2 of 2. Negative results clamp to 0.
Because the guide's own example passes through 181,272.5 and prints 181,272, intermediate values are kept exact (millionths-scale rational arithmetic) instead of IEEE-754 floats; a naive float chain can land one ulp low (1,079,832 instead of 1,079,833 in example C).
4. Type and Guard table (defender's view)
| Situation | Class | Type | Guard |
|---|---|---|---|
| Type disadvantage | Different | 1.5 | 1 |
| Type disadvantage | Same | 1.25 | 1 |
| Neutral | Different | 1.15 | 1 |
| Neutral | Same | 1.0 | 1 |
| Type advantage (natural Guard) | Different | 1.0 | 0.5 |
| Type advantage (natural Guard) | Same | 0.9 | 0.5 |
| Passive / item Guard | Any | 0.8 | 0.5 |
Wheel: STR → PHY → INT → TEQ → AGL → STR. The full interactive resolver and the 5×5 matrix are on the type chart page. A passive “guards all attacks” replaces the type row with 0.8/0.5 regardless of the matchup; Type DEF Boost can still stack on top of it when the defender has advantage.
5. Damage dealt
Damage = (ATK × SA Multiplier × Enemy DR × Type Multiplier × Variance − Enemy DEF) × Guard Multiplier
The mirror of the received formula: the enemy's DR multiplies before your ATK product subtracts the enemy's DEF, and the type table is read from your perspective — you having advantage means the enemy is at disadvantage (Type 1.5 / 1.25, Guard 1), you being countered means the enemy natural-guards (Type 1.0 / 0.9, Guard 0.5), and an enemy passive Guard replaces the row with 0.8 / 0.5. Additional and counter attacks are separate hits: compute them by running the calculator again with normal or Super as you choose — the tool never rolls a 50% chance for you. The full ATK chain (leader skills → turn-start passives → links → Active Skill → ki multiplier, which rounds up → on-attack passives → SA multiplier) would be a separate builder, not an input here.
6. Coefficients that are not pinned down
- Character critical — the in-game description says crits ignore type relations and enemy DEF. The community's long-standing model is ×1.9 replacing type+guard with enemy DEF = 0 (enemy DR still applies); an alternative writes type 1.5 × crit 1.25 (= 1.875). The calculator defaults to the 1.875 variant — the model other community calculators ship — and lets you switch to community 1.9; both are noted as community-tested data, not official game settings.
- Dokkan Mode — one community model bypasses DEF and applies a per-node multiplier. The default node table comes from a 2021 community datamine: successful nodes 0–6 ⇒ ×1.3, 1.5, 1.7, 1.8, 2.0, 2.1, 2.3. The calculator assumes full nodes (6) unless you lower the count; the values come from community testing, not official game data.
- Type ATK Boost — not applied; listed as not modeled.
7. Variance, DEF timing, and the two floors
Variance is rolled per hit in the game (×1.00–1.03); calculators print all three anchors with 1.015 as the headline.
DEF matters at the moment the hit lands: a unit that gains DEF on being attacked uses the stacked value, and entrance/
Active-Skill branches change it further — see the SS4 Gogeta DEF examples (487,771 → 2,438,855 → 3,528,560 under their
written assumptions) on the damage received page. The only two floors are after
DEF × (1 − DEF-ignore) and after Guard; everything in between stays exact, and negative results clamp to 0.
8. Why three ATK Down inputs can't merge
The three sources interact with different quantities: the Super-Attack one modifies the SA multiplier (so it also affects normals, 1.0 → 0.8), the item one is a standalone multiplier, and the passive one sums before applying. Their disable behavior differs too — “Disables ATK & DEF Reduction” kills the SA and passive sources but only conditionally the item source. One merged slider cannot represent any of that; hence three inputs (calculator).
9. How damage reduction stacks (and when it's voided)
General DR sums: 30% + 20% ⇒ ×(1 − 0.5). “Normal attacks only” DR is its own multiplier and only while the enemy is not supering. When the enemy disables ATK & DEF reduction, DR is not itself voided (it is a different mechanic) — but every calculator that conflates “ATK down” with “DR” gets this wrong, which is why they are separate inputs here.
10. Common mistakes
- Re-multiplying a stacked enemy ATK by its self-buff (example E).
- Chaining additive DR (0.7 × 0.8 = 0.56 instead of the correct ×0.5).
- Reading a clamped 0 as immunity — see the floor caveat in §12.
- Applying an enemy crit's “ignore X% DEF” to the crit multiplier instead of DEF.
- Applying the SA multiplier to a DEF snapshot that was already taken against that Super.
11. Worked examples and verification
Every release runs the damage-received examples A–F (0 / 0 / 1,079,833 / 181,272 / 2,982,672 / the nine-row type table), the ATK Down disable cases, the type wheel, share-link round-trips, and the dealt-side constructive math. The damage received page loads each example in one click; expected integers are printed beside every link.
12. Not modeled in this calculator
- Low-damage floor (the game may still apply a tiny floor; negative results are clamped to 0)
- Dodge / evasion; taunt / attack attraction
- Attack and Super Attack nullification (hits are computed as if they land)
- Stun, seal
- Hidden Potential effects other than Type DEF Boost (crit, dodge, addition)
- Type ATK Boost
- EZA / SEZA auto-upgrade; team, links, and ki interpolation
- Fusion, exchange, standby, and Finish form switching
- Damage reflection
- Event-specific rules, including Domains that alter damage received by Super Class characters
Every result renders this list; when damage is 0, the floor entry is highlighted because a calculated 0 is not a guarantee of in-game immunity.